System information

Integral Face and Bypass Coil
This element represents an integral face and bypass coil, which alternates heating and bypass channels with
face-and-bypass dampers before and after the coil.
Figure 89: Integral Face and Bypass Coil
The Integral Face and Bypass Coil element has the following runtime characteristics:
• When the element is bound to a Metasys item, the attached Advanced Value Boxes display all of their functionality.
For information about Advanced Value Box functionality, see Advanced Value Box.
• When the value of the Value binding within the Face and Bypass Coil Primary binding group is:
- Closed - none of the four pipes is animated.
- 25% Open - one of the four pipes is animated.
- 50% Open - two of the four pipes are animated.
- 75% Open - three of the four pipes are animated.
- 100% Open - all four pipes are animated.
• If the coil is used for heating, the animated pipes appear in red, while the non-animated pipes appear in brown.
• If the coil is used for cooling, the animated pipes appear in blue, while the non-animated pipes appear in brown.
• When the value of the Value binding within the Face and Bypass Damper Primary binding group is:
- 0% Face - the blades appear closed.
- 25% Face - the blades are one quarter open.
- 50% Face - the blades are half open.
- 75% Face - the blades are three quarters open.
- 100% Face - the blades are fully open.
133Ready Access Portal Help: Graphic Enterprise Library