Tus neeg siv phau ntawv

i
iCode Connect: Accessing your iCode on Luna G3 PAP Devices
Your Luna G3 PAP device is equipped with many ways of gathering your compliance and usage
data. One proprietary way your device does this is by generating a series of 16-digit codes. These
codes, called iCodes, hold Summary Therapy data. This data is used to create compliance reports
on your device usage. These reports are used by your DME and clinical team to help determine
your therapy compliance and effectiveness for your clinical team. This form will walk you through
finding the iCodes needed to run these reports. Important Note: All G3 devices will show the
iCodes in the same area, regardless of device type (CPAP, AutoPAP, BPAP 25A, BPAP 30VT)
With the unit plugged in, push the
home button which takes you to
the standby screen
Use the Knob to scroll to report
Click the Knob on Report and select the
“iCode” prompt and click on “Enter”
Scroll to Choose from iCode1, iCode7,
iCode30, iCode90, iCode182 and
iCode365. The code will be different
for each selection
Once complete, push the “Home” button twice to return to the Home screen.
1 2
3 4
5
MID- 274 | V.1