User Guide

A GUIDE TO STRATUS 5 FILTERS
STR1030 : Stratus 5 Sponge Filter
STR1020: Stratus 5 HEPA Paper Filter
STR1040: Stratus 5 Bacteria Filter
The Stratus 5 comes with 2 Sponge filters. This
filter goes into the side of the device as shown
above. This filter should be cleaned (washed in
warm water and mild unscented dish soap once a
week in normal operating environments. It should
be replaced whenever it is worn or damaged and in
between patients.
The Stratus 5 HEPA paper filter is located in the
back of the unit as shown above. The unit comes
with one HEPA filter. This filter should be
changed every 10,000 hours and in between
patients.
The Stratus 5 Bacteria Filter is located inside of
the Stratus 5 device itself. It needs to be
changed every 15,000 hours.
MID-231 | V.1