User guide

USER INSTRUCTION DSS-R-CL1100 SERIES
www.meicheng.com.tw
4
3.0 Panel Layout
3.0.1 Front Panel
As shown in the figure below, press on the front panel of Multimedia Recorder
and the unit begins recording. If you want to stop it, press .
3.0.2 LED
Name
Description
POWER
it will be ON during normal power-on
RUN
it will be ON when the system is running
LAN
it will be ON when there is network connection
LCD
it will display the operating status and relevant information during
operation
3.0.3 Rear Panel
As shown in the rear view of the integrated Multimedia Recorder, you only need to
connect the signal cables to the corresponding ports.
4.0 Power on and Running
In normal situation, power on the equipment after connecting the power cable to the
corresponding port at the rear panel, the LCD panel will display “Starting…”. Wait
for 1 minute, when the Multimedia Recorder starts up automatically, the LCD panel
will display the current input definition, serial number, IP address, and other relevant
information.