User manual

1.7 Extension Settings
User Manual 85
1.7.12 Extension Feature Clear
You can reset the settings of the following features on your extension to the default settings with one
operation.
This feature is also known as Station Program Clear.
* These features may not be reset depending on the system programming.
• Some wired telephones are prohibited from using this feature.
• If you go off-hook while your paralleled telephone is in use, the call will switch over to
you.
Features Default Setting
Hot Line* Off
Message Waiting—(All the messages that have been left by other extension users) Off
Call Pickup Deny Allow
Call Forwarding (FWD)* Off
Absent Message Off
Paging Deny Allow
Timed Reminder Cleared
Do Not Disturb (DND)* Off
Call Waiting* Enable—Tone
Executive Busy Override Deny Allow
BGM Off
Data Line Security Off
Paralleled Telephone The telephone in
parallel rings.
Log-in/Log-out Log-in
• After performing Extension Feature Clear, the setting of Call Waiting becomes "Enable—
Tone". In this case, dial tone 2 will be heard when you go off-hook.
Off-hook.
On-hook.
PT/SLT/PS
Enter 790 .
9 07
C.Tone