Specifications

CHAPTER 4 NDA-24213
Page 34
Issue 3.0
Programming the PBX and the D
term
Sending of Returned Result and SMFN
6. Sending of Returned Result and SMFN
DESCRIPTION DATA
Returned Result (RR) sending priority
when receiving Switch Control Facility
(SCF).
Note:
For CallCenterWorX this must be a
“0”.
Service feature for each Tenant
(YY)= 28
(1) Tenant # 01-09
(2) 0: Send RR after SMFN.
1: Send RR before SMFN.
(YY) = 27
(1) Tenant # 01-09
(2) 0: ACD
1: Non--ACD
Sending of SMFN when answering a held call (1) 461
(2) 0: Sent.
1: Not sent.
While the station (STA-A) is talking with
another station (STA-B), after consultation
hold with a CO call, when STA-B has hung
up.
Note:
For Assist and Monitor to work
properly, this must be set to a “0.”
(1) 117
(2) 0: STA-A returns to the call
with the CO line.
1: STA-A hears ROT.
Transfer a trunk call into an ACD group
from a station or SN 610/716 Attcon.
(1) 460
(2) 0: Allowed
1: Not allowed
CM65
START
CM08
END