Specifications

NDA-24213 CHAPTER 4
Page 27
Issue 3.0
Programming the PBX and the D
term
AP01 Initialization
CHAPTER 4 Programming the PBX and the D
term
1. AP01 Initialization
DESCRIPTION DATA
For the IVS (CP00 and CP03):
Assign the slot number to the PN-AP01
board according to the location of the
board.
Note:
The slot number is given by the SENSE 0
switch on the PN-AP01 board.
(1) Slot number (04-15)
(2) PN-AP01 board
For the IVS 2000 Series Software (CP16):
Assign the slot number to the PN-AP01
board according to the location of the
board.
Note:
The slot number is given by the SENSE 0
switch on the PN-AP01 board.
Y= 0
(1) Slot number (04-15)
(2) PN-AP01 board
For the IVS
2
(CP14):
Assign the slot number to the PN-AP01
board according to the location of the
board.
Note:
The slot number is given by the SENSE 0
switch on the PN-AP01 board.
Y= 0
(1) Slot number (04-15)
(2) PN-AP01 board
ID code all clear with AP. To clear the AP per-
perform the following:
Note:
Switch 1 on the PN-AP01 must be set as
follows:
OFF
ON
After clearing the AP01, change SW1-2 and
SW1-3 back to the “ON” position.
CM05
START
CMD6
END
INITIAL
INITIAL
INITIAL
ST + D60 + DE + 0000 + DE + CCC + EXE
4
3
2
1