Specifications

CHAPTER 3 NDA-24213
Page 26
Issue 3.0
Connection Drawings
Connecting Wall Display Boards
Figure 3-10 PN-CC01 Connecting ACD Computer or MIS PC to Wall Boards
As shown in Figure 3-11 below, the RS-232 Cable connects to the COM Port designated as an MIS Port (see
Chapter 5, Heading 1.3, “ACD Computer Setup for Use with Remote MIS PC via RS-232”).
Figure 3-11 Connection of RS-232 to COM Port
NEAX2000 IVS
PN-CC01
PN-AP01
Ethernet Cable
CallCenterWorX Computer
COM Port
RS-232 Cable
Wallboards
NEC Customer Service
NEC ............................... Sales
NEC ............................... NTAC
LWC:0:00 GOS:100%
Interface
Cards
Plug the
RS-232 cable
into the
COM Port
on the back
of the Host
COM Port