Specifications

CHAPTER 3 NDA-24213
Page 20
Issue 3.0
Connection Drawings
Installing the PN-CC01 and the PN-AP01
2. Installing the PN-CC01 and the PN-AP01
Figure 3-3 PN-CC01 Connection Straight to ACD Computer (Client or Server)
STEP 1: Mount the PN-CC01 in any slots LT10 (AP0) - LT15 (AP05). The PN-CC01 requires one LT (AP)
slot.
STEP 2: Mount the PN-AP01 in any slot LT10 (AP0) - LT15 (AP05).
STEP 3: Set the PN-AP01 SENSE 0 switch to the slot number that is programmed in CM05 (see Chapter 4,
Heading 1, “AP01 Initialization”).
STEP 4: Install the 48-TW-0.3 connecting cable from the DCB A connector of the PN-CC01 card to the
bottom connector of the PN-AP01 card.
STEP 5: Install the Ethernet cable from the RJ-45 connector of the PN-CC01 card to the ACD computer
(Client or Server) communicating via TCP/IP.
Note:
One end of this cable must be reversed.
NEAX2000 IVS
PN-CC01
PN-AP01
CallCenterWorX Server
Note: One end of this cable
must be reversed.
48-TW-0.3 Cable
Ethernet Cable
Interface
Cards