Specifications

NDA-24213 CHAPTER 10
Page 219
Issue 3.0
MIS Procedures
Pilot Assignment
6. Pilot Assignment
STEP 1: From the
Configuration menu
, select
Pilot Assignment
. The Pilot Assignment screen will display
(Figure 10-8).
Note:
If the Pilot Numbers have received names in the ACD programming, these names will be downloaded at
startup. If you want to keep MIS names independent of the ACD database, you must set Download Names
to “OFF” in the System Parameters.
STEP 2: The Pilot Numbers configured in the ACD will be listed. To add a Pilot Name to a Pilot Number,
select the
Edit menu
in the
Pilot Assignments
window, and select
Add Record
.
STEP 3: Enter a
Pilot Name
of up to 20 alphanumeric characters in the Pilot Name column.
STEP 4: Select
OK
to accept the entry and close the assignment window, or select
Cancel
to close without
assigning the name.
STEP 5: To delete a Pilot Name, select the
Edit menu
in the
Pilot Assignments
window, and select
Delete
Record
.
STEP 6: Select the Pilot Name you wish to delete (this deletes only the Pilot Name, not the number).
STEP 7: Select
OK
to accept the action and close the assignment window, or select
Cancel
to close without
deleting the name.
Figure 10-8 Pilot Assignment Window