Specifications

NDA-24213 CHAPTER 9
Page 203
Issue 3.0
ACD Procedures
Communication Data
15. Communication Data
Note:
This command is primarily a utility service used by technicians.
Figure 9-19 Communication Data Screen
STEP 1:
Server Communication Settings
Important:
Changes to the Server settings will require shutdown and restart of the Server.
(a)
PBX IP Address
(required)
Enter the four octet IP address for the PBX.
(b)
Min PBX Port
The Min PBX Port and Max PBX Port values indicate the range on the socket ports that the
PBX specified in Step 1(a) is monitoring for external TCP/IP connection data. These settings
tell the ACD what ranges to try in order to establish connection. The default value of the Min
PBX Port setting is 1024.
(c)
Max PBX Port
The default value for the Max PBX Port as discussed in Step 1(b) is 1039.
(d)
ACD Client Port
The ACD Client Port listens for external TCP/IP connections to the ACD (such as Infolink, an
MIS connection, or a Trace connection). The default value is 1039.