Specifications

NDA-24213 CHAPTER 8
Page 111
Issue 3.0
MIS Menu Commands
Configuration Menu
4.11 System Name Assignment
Figure 8-22 System Name Assignment Window
The
Configuration menu
lists the
System Name Assignment
command, which opens the
Change
System Name window
shown in Figure 8-22. If the MIS is configured for TCP/IP, only the tenants that
are assigned under the TCP/IP configuration are available for use as the System name; not all tenants are
shown.
Note:
If the MIS is communicating via an RS-232 serial connection, the only tenant available is Tenant 1.
The System Name is related to the Tenant Name which may have been assigned in the ACD programming.
• If you wish to use the ACD database name, you can check the checkbox and select a tenant from the
drop-down menu.
• If you choose to use an independent System Name, you can leave the check box unchecked and enter
your own name choice in the System Name dialog box.
• If you request a tenant that does not exist on the ACD, the MIS will fail to receive the download
information and the System Name will not be assigned.
Important:
An MIS dedicated to one ACD tenant should select that tenant’s name from the list. The selected tenant’s
name will be inserted in the System Name dialog box.