User manual

Smart_DP RM 9600 User Manual
Seite 6
E - Usage of the hardware
E.1 Working scenario
The picture below shows a possible scenario for the b-plus Smart_DP for Radio Modem Series
device. The power supply for the Profibus-DP/RS-232 interface must provide an operating
voltage between +18-36V DC, whereby the power consumption of the Smart_DP module is
about 2 W.
The Profibus-DP interface is equipped with a SUBD female connector. Via this connector the
Smart_DP can be connected with a standard Profibus cable to the master system (e.g. a PLC
or a PC).