User manual

Smart_DP RM 9600 User Manual
Seite 13
With a successful connection to the Profibus-DP/RS-232 interface the buttons are activated
and the fields 'Firmware version' and 'Serial No' are filed with the corresponding contents as
shown in the picture below:
Picture 2 – Configuration tool (connection established)
In the main window the following buttons can are shown:
'Read': Reads the actual firmware version and the serial number from the module.
'Reset': Resets the module (a contact with the configuration tool is not possible before the first
reboot of the module).
By choosing a tab from the tabbed dialog in the above shown window the individual configura-
tion masks can be selected.