User guide

ICP 300 IN-CAB PRINTER

Introduction

Figure 1

The RDS ICP 300 In-Cab printer is an ultra-compact thermal printer designed

for easy paper loading. It accepts 58mm wide rolls up to 44mm dia. The

printer is connected to and powered from the instrument via a single cable

with RJ-12 connector, and operates with a supply voltage in the range 10-

35V dc. No maintenance is required except to occasionally clean the rubber

paper roller to remove any dirt buildup.

Parts List

Part No Description Qty

S/HU/167-4-001 ICP 300 Printer 1

S/BK/167-4-015 Mounting Plate 1

S/CB/167-4-005 or: Printer Cable for Wizard

S/CB/167-4-006 Printer Cable for Pro-Series/PSi

S/F701-050 M3X 8 Screw 2

S/F713-001 M3 Washer 2

S/FSNR/940117 M6 x 16 Hex Set Screw 2

S/FSNR/406 M6 Nut 2

S/FSNR/940205 M6 Washer 2

S/CBL/TIE/001 Cable Tie 25

S/AC/167-3-030 Paper Roll 2