Specifications

Table Of Contents

EC9100i and EC9600i Series Scanner User Guide Operating the scanner

Operating the scanner

Caution: Do not open the cover or try to access the inside of the scanner while it scans a document.

Preparing documents

To reduce the possibility of errors and damage to the unit:

• Remove all folds and creases in the document.

• Remove any paper clips and staples from the document.

• Make sure that documents are not stuck together.

• Make sure that documents are dry.

Feeding documents

The scanner unit is ready to accept documents when the LED is flashing green. Insert the documents

either one at a time with single-feed (SF) models, or in a batch with auto-feed (AF) models.

Make sure that you place the documents into the feeder with the MICR line at the bottom and facing

towards the outside of the scanner.

Caution: Adjust the exit extension or the pocket stop to fit the documents that you are

scanning. Documents can be damaged or jam in the scanner if the exit extension or pocket stop is not

fitted to the documents.

Single-feed (SF) models

1. Start the scanning process. For example, click Scan on your scanning application.

2. Place a document in the document feeder so that the scanner pulls the document into the

scanner. If you are using an EC9111f, EC9112f, EC9611f, or EC9612f scanner, you must push the

document into the scanner manually.

The document is scanned and processed.