Installation guide

14
E. Connect to a Telephone Line (EC6014 and EC7014)
FOR TEL: If you have purchased the EC6000i or the EC7000i with the optional modem, follow these
directions to connect the telephone line.
1. Insert the end of the telephone line into the TEL port on the back of the scanner.
2. Insert the other end of the telephone line into a telephone jack in the wall.
Test the Telephone Line and Third-Party Line
1. Call the third-party line to ensure that it is working properly.
2. If the third-party line is not working, contact your local telephone company for repair.
3. If the telephone line works, contact your distributor to have the EC6000i or the EC7000i serviced.
CAUTION: Plug the telephone line into an “outside line” analog phone jack only; the modem will not
work if it is plugged into a PBX digital line.