User guide

EC9000i Series Scanner User Guide Operating the scanner

Swiping magnetic stripe cards (optional)

1. Place the card in the slot on the side of the scanner with the stripe down and facing in towards

the body of the scanner.

2. Swipe the card either from back to front or front to back.

Imaging identification cards

The ID imager uses the same track as the document scanner, but you insert cards at the back of the

scanner. Insert the card into the scanner so that the front of the ID card faces away from the scanner. The

ID imager scans both the front and back of the identification card.

1. Insert the identification card into the back of the scanner track until you feel it pinch the card.

The scanner pulls the card through the track.

2. Remove the card from the front of the scanner track.