User guide

EC9000i Series Scanner User Guide Setting up your scanner

Connection ports

Note: Not all scanner models include every item shown in the diagram.

Connector

Description

USB Hub Ports Use this port to connect optional peripheral devices such as a PIN entry

device, or to recharge a mobile device such as a phone.

USB High-speed 2.0 (480 Mb/s). Use this port to connect to a computer.

Power Connect the power adaptor to this port. You must use the RDM A to B, USB

cable.

On/Off Switch Powers the scanner on or off independent of the computer.

K-Slot The K-Slot or Kensington® Security Lock lets you secure the unit with a

cable (not provided) that locks into the slot. Cables can be purchased from

your local computer supply store.

Removing the covers

RDM EC9000i scanner has two covers that can be removed in order to clean the image sensor, replace

cartridges, or clear paper jams.

Front cover

Remove the front cover when you need to clear paper jams,

replace the franker cartridge, or to clean the image sensor.

1. Disconnect the power cord from the scanner.

2. Pull the insertion extensions forward.

3. Grasp the front and the back end of the front cover.

4. Gently pull the cover upwards until it detaches from

the scanner.

USB hub

ports

USB

Power

K-slot

On/off

switch