Installation guide

5
Setting Up the RDM Connect Scanner
To set up the RDM Connect scanner, do the following:
• Choose a Location
• Unpack the Shipping Box
• Inspect the Unit’s Features
• Insert the Franking Acknowledgement Printer and Endorser
Inkjet Printer Cartridges, if they are included on your scanner.
Choose a Location
Locate your scanner in a place that:
• Has a flat surface, such as a counter top or table.
• Is convenient for the scanner operator.
• Offers adequate ventilation and protection from elements such as heat, dust, oil, or moisture.
• Is close to the hosting PC (USB 2.0 high speed connection required).
• Is close to a power supply.
Unpack the Shipping Box
1. Open the top of the box.
2. Remove and unwrap the items.
3. Save the box and packing material for future use.
Check List
Your shipping box should include the following items:
• RDM Connect scanner
• USB cable
• Power supply
• (Optional) Franking and acknowledgement printer
• (Optional) Inkjet cartridge