Installation guide

3
Introduction
The RDM Connect™ scanner is a cost-effective, feature-rich, source item image and card processing solution. Using RDM’s
industry leading progressive MICR method and imaging technology, the RDM Connect scanner is ideal for Check
Electronification, Check Cashing, and Walk-in Bill Payment applications. The RDM Connect scanner provides Remote Deposit
Capture features as well as features that are suitable for card-based processing.
Requirements
• The RDM Connect unit is for indoor use only. Keep the RDM Connect dry; avoid areas of high humidity.
• Do not remove any cabinetry other than the areas specified in this guide. Removing cabinetry other than the areas specified in
this guide will void the warranty.
Recommendations
• This unit may be installed and configured by a distributor (reseller) other than the original manufacturer. Record all distributor
contact information for future reference.
• Save the original box and packing material. Reuse them if the unit must be shipped to a new location.
• Position the unit so that the operator has easy access to the document path and a clear view of the LED. Do not put the unit
close to a heat source, in direct sunlight, or close to any device that can emit electromagnetic interference, such as a computer
monitor or power adapter.