Installation guide

22
Maintaining the RDM Connect
Scanner
The RDM Connect scanner performs best when all working surfaces are clean and free of foreign material.
Cleaning the Scanner
Cleaning the Outside Cabinetry
1. Use a damp cloth and mild soap.
Cleaning the Inside of the Scanner Unit
You might need to remove dust and debris from inside the scanner unit.
1. Remove the front cover and the endorsement printer cover.
2. Use a dusting brush designed for use on electronic equipment or a compressed air duster to clean inside the scanner.
3. Replace the covers.
Caution:
• Always disconnect the power to the scanner before cleaning it.
• Solvents or harsh cleaners might damage or discolor the cabinetry.