Installation guide

15
Replacing the Endorser Inkjet Printer Cartridge
When you place the new inkjet cartridge into the holder, make sure that you insert it at the angle described in the following steps. If
you do not insert the cartridge properly, it might not make contact with the item when it is scanned.
1. Remove the endorsement printer cover.
2. With one hand, gently pull the inkjet latch forward.
3. With the other hand, remove the inkjet cartridge.
4. To insert the new inkjet cartridge, pull the inkjet latch back.
5. Place the inkjet cartridge into the holder at an angle so that the back of the cartridge is lower than the front of the cartridge.
6. Holding the inkjet cartridge at an angle, push it down into the holder until the cartridge snaps into place.
7. Make sure there is no gap between the inkjet cartridge and the endorsement channel.
8. Replace the endorsement printer cover.
Inkjet Latch Insert the inkjet printer cartridge at an angle