Installation guide

12
Endorsement Printer Cover
Remove the endorsement printer cover when you need to clear paper jams,
to insert or replace the Endorser Inkjet Printer Cartridge, or to clean the
image sensore.
1. Grasp the top of the endorsement printer cover.
2. Gently pull the cover upwards until it detaches from the scanner.
To replace the endorsement printer cover:
1. Carefully place the endorsement printer cover over the scanner
assembly; make sure that the cover is overlapping the assembly
correctly.
2. Gently push the cover down until it snaps into place.
Insert the Franking Acknowledgement Printer and
Endorser Inkjet Printer Cartridges
The Franking Acknowledgement Printer Cartridge is an ink stamp that defaces the front of each check with a “Electronically
Presented” message. All models are franking-enabled; the franking acknowledgement printer must be purchased as a separate
consumable.
The Endorsement Inkjet Printer places user-defined text on the rear of the source item or check. The Endorsement Inkjet Printer is
an optional feature. The Endorsement Inkjet Printer Cartridge is included with your unit. Replacements can be purchased by
contacting your solution provider or reseller.
Follow the directions to insert the cartridges into the scanner unit.
Caution:
• Ink may be harmful if swallowed.
• Avoid contact with eyes.
• Damage to the unit or the cartridge resulting from modifying the cartridge is not the responsibility of RDM.
• The ink cartridge is not refillable.
• Not licensed for modifications.
• RDM can change product designs, features, or specifications at any time.