Installation guide

5
Requirements
• The EC6000i, the EC7000i, and the EC7500i units are for indoor use only. Keep the EC6000i, the
EC7000i, and the EC7500i dry; avoid areas of high humidity.
• Do not remove any cabinetry other than the areas specified in this guide. Removing cabinetry other
than the areas specified in this guide will void the warranty.
Recommendations
• This unit may be installed and programmed by a distributor (reseller) other than the original
manufacturer. Record all distributor contact information for future reference.
• Save the original box and packing material. Reuse them if the unit must be shipped to a new location.
• Position the unit so that the operator has easy access to the check path and a clear view of the LED. Do
not put the unit close to a heat source, in direct sunlight, or close to any device that can emit
electromagnetic interference, such as a computer monitor or power adapter.