Installation guide

17
EC6000i/EC7000i Default Sound Signals
Several conditions are also signaled by a pattern of tones in addition to the LED display.
A Typical Check Processing / LED Cycle for EC6000i/EC7000i
1. The LED is Solid Amber; the unit is on and idle.
2. The LED turns to Solid Green; the scanner is ready to accept a check.
3. The LED turns OFF (3–4 seconds), and then Flashes Green; a check is being scanned.
The unit emits a short beep sound.
4. The LED returns to Solid Amber; the transaction is complete.
Tone Meaning
One short beep
LED is flashing green
The unit was successful in reading the MICR line.
Three short beeps
LED is flashing red
The unit was not successful in reading the MICR line.
One long beep
LED is flashing red
An error occurred during processing or storing of the captured image.