Installation guide

F. Connect the Power Cord

1. Insert the round end of the power cord into the power port on the back of the scanner.

2. Align the flat side of the power connector facing up.

3. Plug the metal-pronged end of the power cord into an electrical power outlet.

4. When you connect to power, the LED lights up. Your unit is now powered on.

CAUTION: Disconnecting the power source while the terminal is processing a transaction may cause data

files stored in the unit’s memory to be lost.

NOTE: The power adaptor includes a locking mechanism that securely connects the power cord to the

scanner. To prevent cord damage, do not pull on the cord. Firmly slide back the locking mechanism before

disconnecting the power cord from the unit.