User guide

EC7000i and EC7500i User Guide Introduction
Introduction
The RDM EC7000i and EC7500i series scanners provide affordable functionality in a compact and
efficient design. Featuring RDM’s industry leading Progressive MICR Method and imaging technology the
EC7000i and EC7500i series scanners deliver optimum MICR read rates and image quality. In addition,
all EC7000i and EC7500i series scanners include a franker cartridge to comply with various payment
industry guidelines.
With several models and feature options to choose from, the RDM EC7000i and EC7500i series scanners
are an ideal fit for payment applications such as remote deposit capture, healthcare POS, retail POS, and
walk-in bill payments.
About this guide
This guide describes the EC7000i and EC7500i series scanners, some basic operations, and how to
maintain your scanner. For instructions on how to use your scanner to scan documents with your
computer or credit card terminal, contact your solution provider.
Requirements
The EC7000i and the EC7500i scanners are for indoor use only. Keep the scanners dry and avoid areas
of high humidity.
Do not remove any parts other than the areas specified in this guide. Removing parts other than the
areas specified in this guide will void the warranty.
When you are working inside the scanner, such as when you are replacing the franker cartridge, make
sure the scanner is disconnected.
Recommendations
Record all distributor contact information for future reference.
Save the original box and packing material. Reuse them if the unit must be shipped to a new location or
returned for service.
Position the unit so that the operator has easy access to the check path and a clear view of the LED. Do
not put the unit close to a heat source, in direct sunlight, or close to any device that can emit
electromagnetic interference, such as a computer monitor or power adapter.
©2014 RDM Corporation Page 6