User guide

EC7000i and EC7500i User Guide Appendix A

Appendix A

This appendix describes the EC7000i series scanners’ LED and beep signal patterns for serial numbers

23x and lower.

Startup

Signals Meaning / What to do

Red/Green/Amber flashing

cycle

The scanner is starting up and performing diagnostics. Wait for the

scanner to finish.

Solid red The scanner failed a start-up test. Check the computer’s display for

instructions. If you need more help, contact your distributor (reseller).

Solid amber The scanner is ready. You can start a task by using the check

application on your computer or terminal.

Document scanning and processing

Signals

Meaning / What to do

Green solid The scanner is ready to scan a document. Insert a document.

Green flashing The scanner is processing the document. Wait for the scanner to

finish.

Green flashing and one short

beep

The scanner read the MICR line successfully.

Amber flashing The scanner is communicating with your computer or terminal. Wait for

the scanner to finish.

Red flashing and three short

beeps.

The scanner failed to read the MICR line. Check the computer or

terminal’s display for instructions or refer to your local procedures. If

you need additional assistance, contact your distributor (reseller).

Red flashing and one long beep An error occurred processing or storing the document image. Check

the computer or terminal’s display for instructions or refer to your local

procedures. If you need additional assistance, contact your distributor

(reseller).