Specifications

4.2 Setting DMX address
and DMX mode
To set a DMX address of the
current displayed fixture,
address” screen will appear. Set DMX address and confirm it with
changing DMX address, tap .
If you nee
d type a DMX address < 100, type 0 on the first position of the address,
=25, type 025.
To set a DMX mode
of the current displayed fixture, touch and hold the DMX
screen will appear. Select desired DMX
changing DMX address, tap .
Figures in parentheses give a
number of used channels
4.3 Menu “Preferences”
To enter the menu,
slide finger towards the bottom edge of the screen and the PREFERENCES screen will appear.
To continue on the next page, tap a vertical yellow arrow. To return back at main screen, tap a horizontal yellow
arrow.
To enter desired menu, tap menu item
RDM Communicator
11
and DMX mode
current displayed fixture,
touch and hold the DMX address line until the“ Set DMX
address” screen will appear. Set DMX address and confirm it with
. To go back
at the
d type a DMX address < 100, type 0 on the first position of the address,
of the current displayed fixture, touch and hold the DMX
preset
line until the“ DMX
mode and confirm it with
. To go back at the main screen without
number of used channels
at respective DMX mode.
slide finger towards the bottom edge of the screen and the PREFERENCES screen will appear.
To continue on the next page, tap a vertical yellow arrow. To return back at main screen, tap a horizontal yellow
To enter desired menu, tap menu item
touch and hold the DMX address line until the“ Set DMX
at the
main screen without
d type a DMX address < 100, type 0 on the first position of the address,
e.g. DMX address
line until the“ DMX
preset”
. To go back at the main screen without
slide finger towards the bottom edge of the screen and the PREFERENCES screen will appear.
To continue on the next page, tap a vertical yellow arrow. To return back at main screen, tap a horizontal yellow