Instructions / Assembly

(Fig. 20)
7.
Insert Aluminum Structural Column into
the bottom of the Vinyl Sleeve
Slide 4" centering lock around the
Structural Aluminum Column and press
into the top of the Vinyl Sleeve. Slide
block 1" past aluminum column to allow
for base plate (Fig. 15).
8.
Install post by aligning Structural
Aluminum Column over the circular
portion of the bottom aluminum base
plate (Fig. 16). Once seated on the base,
lower the Vinyl Sleeve over the raised
tabs at the outside of the base (Fig. 17).
Now with top base plate aligned over
Porch Post, lower roof structure into
place (Fig. 18 & 19).
9.
OPTIONAL: Install EATRU Adjustable
4 piece Trim Ring. To size the 4-piece
Ratchet-lock Trim Collar, refer to the
markings on the underside of each piece.
Tip:
4" posts will require all 8 pieces to be
trimmed to 4" mark. 5" posts will require
all eight pieces to be trimmed to 5"
mark.
Snap the trim collars together at the
top and bottom of the turned porch
post (Fig. 20). Slide each trim collar
tightly against the mounting surface and
secure to the vinyl post sleeve with vinyl
adhesive, if desired.
(Fig. 15)
(Fig. 17)(Fig. 16)
(Fig. 18)
(Fig. 19)
6