Instructions / Assembly

10.
Secure the bottom mounting base to the
deck or the support surface with low-
prole fasteners (Fig. 20). Do not forget
the gasket on ACQ lumber or concrete.
NOTE: For concrete mount, pre-drill with
the masonry bit and secure with 4 low-
prole masonry fasteners.
11.
OPTIONAL: Install EATRU Adjustable
4 piece Trim Ring. To size the 4-piece
Ratchet-lock Trim Collar, refer to the
markings on the underside of each piece.
Tip:
4" posts will require all 8 pieces to be
trimmed to 4" mark. 5" posts will require
all eight pieces to be trimmed to 5"
mark.
Snap the trim collars together at the
top and bottom of the turned porch
post (Fig. 20). Slide each trim collar
tightly against the mounting surface and
secure to the vinyl post sleeve with vinyl
adhesive, if desired.
(Fig. 20) (Fig. 21)
11