Installation Guide

ENGLISH

A) Aluminum Bottom Rail Stiffener – 1

B) Vinyl Bottom Rail – 1

C) Aluminum Top Rail Stiffener – 1

D) Vinyl Top Rail – 1

E) Balusters – (see chart below)

F) Top Mounting Bracket – 2

G) Bottom Mounting Bracket – 2

H) Snap on Bracket Covers – 6

I) Rail Mounting Screws – 12

J) Rail Mounting Set Screws – 4

RAIL

LENGTH

SQUARE BALUSTERS PER KIT TURNED BALUSTERS PER KIT ROUND BALUSTERS

PER KIT

GLASS BALUSTERS

NEEDED PER KIT

4' Kit 9 N/A N/A N/A

6' Kit 14 14 15 9

8' Kit 19 19 20 12

10' Kit 24 24 26 N/A

– Safety goggles

– Tape measure

– Pencil

– Level

– Power screwdriver/drill

– Power saw

– Straight edge/ruler/triangle

TOOLS NEEDED:

LEVEL RAIL

Warning: Always wear safety goggles.

COMPONENT LIST:

Check the kit to ensure all components are included.

RDI has obtained a PFS TECO research report on the International Building Code

and the International Residential Codes

. For a full report,

see PFS Evaluation Report No. RR-0115 at www.pfsteco.com.

NOTE: Check with your local building code ofce for design load requirements for guard rails and bottom space requirements. All supporting

structures should be built in accordance with applicable building codes.

LIMITED WARRANTY

To obtain and review a copy of the warranty please go to: rdirail.com/warranty. You can also contact (877) 420-7245 or write to:

RDI Warranty, 545 Tilton Road, Egg Harbor City, NJ 08215 to obtain a copy of the warranty.