Installation Guide

11
ENGLISH
9.
To allow for baluster expansion, raise the top
rail approximately
1
/
8
". Pre-drill the holes for
the mounting brackets to avoid stripping the
stainless steel screws (Fig. 16).
Secure top rails in place using provided top rail
mounting screws (J) into both sides of each
bracket at the top and bottom post (Fig. 17).
10.
Secure top railing to brackets using provided
set screws (L) as shown in gure 18.
11.
Check entire installation for accuracy before
snapping snap on bracket covers (Fig. 19)
into place, and inserting the button plugs into
the bottom brackets (Fig. 20).
(Fig. 17) (Fig. 18)
(Fig. 20)
(Fig. 16) (Fig. 19)