User's Manual

TECHNICAL DOCUMENT
TITLE:
WALL MOUNT STAIRWELL LED LIGHT SPECIFICATION
REVISION: 2.4 DATE:
4/5/2013
Stairwell Light Specification.docx 12/4/12 Page 2 of 4
if pressed for longer). Controller monitors battery voltage etc and returns
status of test on test LED.
Labeled according to UL (“Diagnostic”)
 Status LED(s)
One LED for self-diagnostic result
One LED for status (AC/battery charging)
 Agency approvals
UL 924 rated - EMERGENCY LIGHTING AND POWER EQUIPMENT
 NFPA 101 compliant (UL rating covers this)
FCC certified (RF transmitter& EMC)
 AC input: 90-277VAC 50/60Hz.
 Meets DLC requirements
Power Factor >0.9
THD<20%.
Min. lumen output :2000 lm
Zonal lumen: >85% 0-90°
Min. efficacy: 70LPW
CCT<5700K
Min CRI: 65
L70: 50,000hours
Warranty: 5years
PowerSupplyComponents
LightEngine
Use up to 32W light engine:
 12x9 LEDs
 Vf< 36V
 If =<900mA

New power supply design to support charging battery and powering LEDs. Combining
the functions to save cost.
Wireless
New low-cost sub-GHz wireless system to be developed using CC430. Same micro will
act as system controller.
OccupancySensor
Use AS081 chip and new lens from XCO-100.