ULC58 Owner’s Manual For use with UDR777HD UDR780HD © 2016 Uniden America Corporation Irving, Texas Issue 1, July 2016 Printed in China
CUSTOMER CARE At Uniden®, we care about you! If you need assistance, please do NOT return this product to your place of purchase. Quickly find answers to your questions by: 1. Reading your owner’s manual, included with this product. 2. Visiting our customer support website at www.uniden.com. Uniden surveillance products are not manufactured and/or sold with the intent to be used for illegal purposes. Uniden expects customers’ use of these products to be in compliance with all local, state, and federal law.
IMPORTANT SAFETY PRECAUTIONS ##This manual contains important information about this product’s operation. If you are installing this product for others, you must leave this manual or a copy with the end user. When using your equipment, always follow basic safety precautions to reduce the risk of fire, electric shock, and injury to persons, including the following: xx The camera has an IP65 weather rating.
SAVE THESE INSTRUCTIONS! For best results: To avoid damage to your equipment, follow these simple precautions: xx Do not drop, puncture or disassemble any part of the equipment. There are no user-serviceable parts inside. xx Do not expose the equipment to high temperatures, and avoid leaving the equipment in direct sunlight for more than a few minutes. Heat can damage the case or electrical parts. xx Do not place heavy items on top of the equipment or expose the equipment to heavy pressure.
ULC58 LIGHT CAMERA The ULC58 Light Camera is an accessory camera for either the UDR777HD or UDR780HD systems. WHAT’S IN THE BOX • • • • • Digital Wireless Camera with stand (1) AC Adapter for Camera (1) Mounting screws and anchors (1 set) Antenna (1) Owner’s Manual (1) ##If any items are missing or damaged, visit our website for assistance www.uniden.com. PARTS OF THE CAMERA 1 2 3 8 4 7 5 6 No. What it does 1 Camera Antenna: Sends and receiveds signals to/from the monitor.
SET UP THE ULC58 CAMERA Basic steps to install and set up the ULC58 camera are: 1. Update the UDR system firmware for the ULC58 camera. 2. Pair the ULC58 camera to the UDR system. 3. Install the ULC58 camera. 4. Set ULC58 camera paramaters. UPDATE MONITOR FIRMWARE FOR ULC58 Go to www.uniden.com and search for the ULC58 product page. Follow the instructions to update your monitor. 1. Eject the SD card from the monitor. 2.
1. Attach the camera’s antenna and plug the camera into power. 2. Tap Pairing on the Camera Setup screen. 3. Tap the channel number you want to pair the camera to. 4. A message displays with instructions to press the PAIR button on the camera. A 30-second countdown begins. Press and release the PAIR button on the back of the camera (see page 5). ##You must press the PAIR button on the back of the camera during the 30-second countdown; otherwise, the camera will not be paired. 5.
Timer The Timer option lets you set a start and end time for the light camera to turn itself on and off. Dimmer The Dimmer option lets you set how strong the LED lights will display. Options are 25%, 50%, 75%, and 100%.
PRODUCT SPECIFICATION Camera Specifications Image Sensor 1/2.7 inch FHD Single chip CMOS Image Sensor Effective Pixel Area 1920 (H) x 1080 (V) Image Processing Format H.264 Image Resolution / Frame Rate Full High Definition 1080p (FHD) @10fps / High Definition 720p @ 24fps Lens 3.6mm F1.
Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Avis de conformité à la FCC : Ce dispositif a été testé et s’avère conforme à l’article 15 des règlements de la Commission fédérale des communications (FCC).
LEGAL REMEDIES: This warranty gives you specific legal rights, & you may also have other rights which vary from state to state. This warranty is void outside the United States of America & Canada. PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the instructions in the owner’s manual you are certain that the Product is defective, pack the Product carefully (preferably in its original packaging).
IC Caution: IC Note : Cet appareil est conforme à la Partie 15 des règlements de la FCC et aux normes RSS de l’Industrie du Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer des interférences nuisibles, et (2) cet appareil doit accepter toute interférence reçue, y compris les interférences qui peuvent provoquer un fonctionnement indésirable.
