User's Manual

18
Common Operations
To... Do This...
Change between quad
view, single view, and scan
for Live view
Press
CHŹ to cycle through the Live modes in the following order:
CAM1—CAM2—CAM3—CAM4—QUAD—AUTO Scan — CAM1
Check the temperature The temperature displays on the monitor screen when the camera is
in full screen mode. See page 22.
Turn on the night light Press
NIGHT LIGHT on the side of the camera (page 11) or on the
monitor (page 13). See page 30 for details.
Set the date and time See page 20.
Set the room temperature
range for the temperature
alert
See page 23.
Use the Lullaby function See page 30.
Adjust UBR223 volume
3UHVVŸ
Vol LQFUHDVHYROXPHRUź Vol (decrease volume) on either
the camera or the monitor.
Use the Intercom 1. Press and hold
TALK on the monitor.
2. Speak into the microphone.
3. Release to hear reply.