User's Manual

8
Quad Mode
Use Quad mode to view up to four cameras simultaneously. Users can set schedule recording in quad
mode.
SD Card Recording
The system is designed for SD card recording. You can manually record the video at your desire or the
receiver records when there is motion detected by the cameras and under the A/REC function. Before
recording, you need to insert a SD card to the SD card slot. The system can support the size of up to
32GB SD card.
Recording Mode
Auto Recording
Use
Motion to set the system to automatic recording mode. In this mode the receiver starts
recording when motion detected by any activated camera. The recording time can be set to 5s,15s or
30s after last detection.
In quad mode, when motion is detected by a camera, the receiver switched to display the image from the
camera in full screen status and starts recording when you set the mode of QUAD is Single. After
recording, it automatically switches back to quad mode. But when you set the mode of Trigger Recording
is Quad,the receiver switched to display the image from the camera in quad screen status and starts
recording. Press
Motion again to cancel automatic recording mode.
Manual Recording
Press Record, the receiver starts recording. Press the key again to cancel manual recording.
Schedule Recording
Set the recording start time and end time, then switch on schedule recording in the menu to enable
schedule recording. In this mode the receiver records at a certain time every day.
Playback
When there is new recorded file, the indication LED NEW below the LCD screen will be on, and the
indication icon on the LCD screen appears and flashes.
Follow the steps to play the recorded files.
1). In viewing mode, press the OK on the receiver to
enter the operation interface, show two submenus,
VIDEO and PHOTO. Under the PHOTO menu
contain FAMILY, FRIENDS, PERSONAL (when
insert the SD card, this files of name can’t be
deleted or renamed.), which can store the pictures.