User's Manual

5
2. After the receiver is well positioned, plug the AC adaptor power output cable into the 5V POWER input
of the receiver, and plug the power plug into a wall outlet or surge protector.
3. If you wish to view the receiver images on a larger screen, connect one end of the included AV cable
to the AV output of receiver, and connect the other end to the Video IN (Yellow) and Audio IN (White)
ports on the TV, VCR or other viewing/recording devices.
Note: When outputting Audio/Video to TV, etc, press the AV button on the remote control to output audio
and video to TV.
The receiver installation is now completed.
Wireless Camera
Front & Side Controls
1. Camera Antenna – Sends & receives signals to or from
the receiver.
2. AC Adaptor Jack – Plug the AC adaptor to the jack for
camera’s power supply.
3. Wall Mounting Bracket – Use the bracket to mount the
camera on a wall or other flat surfaces.
4. IR LEDs – Infrared LEDs provide viewing in no/low light
conditions
5. Lens – Catches the video in front of the lens and transmits
video from camera to receiver.
6. Microphone – Receives sounds from the area near the
camera, and transmits sound from the camera to the
receiver.
7. PIR Sensor – Detects motion in front of the lens and emits
detection signal to transmitter.
8. Speaker – Produces the sound transmitted from the
receiver.
Back Controls
9. Pair Button – The pair button is located on the back of
the camera, it is used to pair the camera with receiver.
10. Bracket Jack – Screw the wall mounting bracket to
the jack, and fix the bracket on a wall or other flat
surfaces.