User's Manual

Menu: Touch to access the receiver menu. Press the key again to exit.

OK: In “Menu” mode, Press to perform “confirmation” operation; in viewing mode, press to

enter file list- Playback function.

Volume down/up : In “Menu” mode, work as direction key left/ right; In “Zoom ×2”, they can

move the image to left or right; In “Preview” mode, it can change volume of the LCD.

Channel down/up: In “Menu” mode, work as direction key up/down; In “Zoom ×2”, they can

move the image upward or downward; In “Preview” mode, it can change channel between different

cameras.

View: In manual channel switch mode, press to enter auto channel switch mode, LCD will

automatically switch to next channel connected to working camera; in auto channel switch mode, touch

to enter “Quad view”; In “Quad view”, touch to enter auto channel switch mode; In “playback” mode,

playing recorded videos, press the key to open a small window to monitor the live image took by current

camera.

Scan: Touch and the receiver is in scan mode (screen saving). When receives signals from the

PIR trigger or Sound trigger, the LCD will lighten up and show the images from the camera.

Talk: Touch and hold to talk back to the camera whose image is displayed on the screen.

3. Indication LEDs – Indicates the status of the system. There are 4 indication LEDs:

NEW: Indicates new recorded video.

FULL: Indicates that the SD card is full of memory. It is only available when Overwrite is disabled.

MOTION: Indicates that the receiver is in auto recording mode. Receiver starts to record when there is

motion detection in camera side.

SCAN: Indicates that the receiver is in scan mode (screen saving)

Back Controls

4. Receiver Antenna – receives & sends

signals from or to the camera(s). Adjust the

antenna to vertical position when the

signal reception is not good.

5. Speaker – Produces the sound

transmitted from the camera(s).

6. Hanging Hole – Insert the screw which

is already installed on a wall into the hole,

and push the receiver downwards to hang

the receiver on the wall.