User's Manual

14
Pairing Menu
The system comes with camera(s) that have already been paired. The pairing function assigns each
camera to a different channel on the wireless receiver (up to 4 cameras),
and is necessary for configuring additional cameras.
Use
to select the desired pairing channel, and press OK to begin
the pairing process with a camera.
NOTE: It is highly recommended to pair the cameras to the receiver
before permanently mounting the cameras. See the pairing section of this
manual for details.
Camera Pairing
The system comes with camera(s) that have already been paired. These cameras will communicate with
the receiver once powered on.
The pairing function assigns each camera to a different channel on the wireless receiver (up to 4
cameras), and is necessary for configuring additional cameras.
NOTE: It is highly recommended to pair the cameras to the receiver before permanently mounting the
cameras.
1. Power on the receiver by connecting it to power outlet with supplied 5V
power adaptor.
2. Power on the camera by connecting it to power outlet with supplied 9V
power adaptor.
3. Press the
Menu the receiver. Navigate to the Pairing menu option
by pressing the
/ on the receiver. Press OK to enter the pairing operation.
4. Select a channel and press OK to confirm the selection.
5. A message will be displayed on the receiver screen.
The receiver will count down from 30~0 – you must press the Pair
button on the camera during this time to successfully pair the
camera.
If the button on the camera is not pressed, the receiver will return to
the view screen, and no pairing will take place.