User's Manual

- Zoom: The image can be set at original size or double size by

selecting zoom x1 and zoom x 2. In double size mode, press the

navigation buttons to view the parts out of the LCD screen.

- Default settings: Select Yes to reset the receiver to factory

defaults.

Camera On/Off Menu

Select a camera by pressing , then pressing / to

switch on or switch off the camera. Press

to confirm the

change and exit.

NOTE: The currently selected camera will have On/Off highlighted in

RED.Any disabled channels will beblacked out in Quad mode.

Brightness

The brightness of the screen can be adjusted with the / .The

makes the screen lighter and the makes the screen darker.

Video motion detect

The option of this key can separately set the camera’s sensitivity of

motion detect and mask area.

You can use the Mask Area menu to set the area where you don’t want to

motion detect ,and the remaining of area ,if there is abnormity, the

corresponding camera will trigger the monitor to record it.