User's Manual

9
2). Select the folder VIDEO and press OK. You will
see some folders name by date. For example:
20120520 means the videos in this folder are
recorded on May 20th
,
2012.
3). Select a folder and press OK to enter submenu.
You will see the recorded files named by time. For
example: 1-155937 means the video is recorded at
15:59:37 and from camera 1.When under the mode
of QUAD,the recorded files named by
Q-hour/minter/second .
4). Select the video you want to view and press OK,
the video will be played on the LCD screen. Then
you can use the navigation buttons to play/pause,
stop, forward, backward.
When you played the video , press
View, you can see a small window on the top left corner of the
screen to show the picture of CAMERA1, switch other channel by
,re-press View can close
this function.
Accessing Menu System
Use Menu Menu on the receiver to access to Menu system.
Use
to navigate up/down/left/right in the menu, and press the OK to confirm a setting or
selection.
Main Menu
The Main Menu contains 6 submenus:
1.Settings –Use the menu for system settings, such as alarm volume, brightness and date & time
setting.
2. Camera On/Off – Use the menu to switch on or switch off a specified camera.
3. Brightness – Use the menu for adjust the brightness of the screen. Use
to change the bar
from DARKEST (left) to LIGHTEST (right). Press OK to confirm the adjustment.
4. Video motion detect – Use the menu to set Camera’s motion detect sensitivity and mask area.
5. Recording–Use the menu for SD card recording settings.