User's Manual

Stopping Scheduled Recording
When the stop time arrives, the system stops recording automatically. If necessary, you can stop
schedule recording manually.
To stop schedule recording: Press Rec to stop schedule recording.
Modifying or Deleting a Recording Schedule
You can modify any recording schedule by adding or subtracting recording time.
To modify /delete a recording schedule:
1. Press Menu , then select Record. Press OK to confirm.
2. Select Schedule Recording.
3. Press the joystick up / down arrow to select Modify and press OK to confirm.
4. Select which channels to change the schedule for by pressing the joystick left / right arrow to move the
cursor, then press OK to include or dismiss the channel.
5. Select the start time and end time for the modification. This could be a span of time you wish to add to
or subtract from an existing schedule. Press the joystick left / right arrow to move the cursor, then press
the joystick up / down arrow to change the start and end time.
6. Select which days of the week to apply the modification to by Pressing the joystick left /right arrow to
move the cursor, then push the joystick OK to include or dismiss a day
7. Press the joystick left / right arrow to select the type of modification:
Select Save to add onto a continuous schedule.
Select Motion then Save to add onto a motion schedule.
Select Delete to subtract from either type of schedule.
8. Press Menu until all menus are closed.
Note:If you delete a recording schedule during a scheduled recording time, the camera(s) will continue
to record video for a short period afterwards. The system checks for changes in recording schedules
every half hour and will eventually stop recording if a schedule has been deleted.
- File Overwrite: Use the overwrite feature to have the system
overwrite the oldest recorded data on the SD card once the SD
card is full
5.5 Camera Setup:
Pairing :The system comes with camera(s) that have already
been paired. These cameras will communicate with the receiver
once powered on.