User's Manual

5.4 Record

Use the Record menu to change Duration(motion recording time), set a recording schedule, and

enable/disable overwrite.

You can set up the recording parameters in record menu.

Note: To use the recording function, make sure a SD card is

inserted into the SD card slot.

- Duration: The recording time when there is motion detected by

a camera in automatic recording mode. The recording time can

be set to 15s ,30s or 1 minute.(Default 15s)

- Schedule Recording: Use scheduled recording to have the

system automatically record continuously or based on motion

from one or more cameras according to a selected start and stop

time. Scheduled continuous recording will record constantly,

whereas scheduled motion recording will only record scenes of

movement within the scheduled recording time.

Set a recording schedule:

1. Press Menu, then select Record. Press OK to confirm.

2. Select Schedule Recording.

3. Press the joystick left / right arrow to view existing recording

schedules for each day of the week. Continuous recording

schedules appear as green bars, while motion recording

schedules appear as orange bars.

4. Press OK to create a new recording schedule.

5. Select the channels that will use this recording schedule.

Press the joystick left / right arrow to move the cursor and press

OK to include or dismiss the channel.

6. Select the start time and end time for schedule recording by

press the joystick left /right arrow to move the cursor, then press

the joystick up / down to change the values.

Note:The time uses a 24-hour clock.

7. Select which days to apply the recording schedule to by pressing the joystick left /right arrow to move

the cursor, then press OK to include or dismiss a day.

8. Press the joystcik left / right arrow to select Save, then press OK to create a continuous recording

schedule.

OR Press the joystick left / right arrow to select Motion and press OK to enable the recording schedule

for motion recording only. Select Save when finished to save your settings.

9. Press Menu until all menus are closed.