User's Manual

2.Information:Set up the Static IP address and Dynamic IP on/off,
display the current network information(IP State,IP Address,
default gateway, MAC address ,UID as pasted on the back of
monitor ,etc).
3.Reset password:
Reset the password of remote access by
000000
5.2 Detect
Separately to Set each Camera’s motion detect sensitivity (High, Medium, Low, Off), Press the joystick
up/down arrow to select then Press OK to confirm the adjustment.(Default Low)
5.3 Alert
Press the joystick left/right arrow to decrease or Increase the
volume of the buzzer when motion is detected by the camera(s).
If you want to turn off the buzzer sounds, turn the alert volume to
the minimum setting(Default 0)