User's Manual

5 Accessing Menu System
Use Menu on the receiver to access to Menu system.
Use the joystick to navigate up/down/left/right in the menu, and push the joystick OK to confirm a setting
or selection.
The Main Menu contains 5 submenus:
1.Settings –Use the menu for system settings, such as
date & time ,default setting, format memory, time zone,
network and firmware update.
2. Detect–Use the menu to set Camera’s motion detect
sensitivity(Hight,Medium,Low,Off)
3. Alert– Use the menu for Receiver beeps level, to alert
you when motion detected by camera. Press the joystick
left/right to decrease/increase the volume of the audio
alarm. Press OK to confirm the adjustment.
4. Record–Use the menu for SD card recording settings.
5.Camera–Use the menu to add camera(s) to the
receiver, adjust the camera on/off, adjust the brightness,
resolution for each camera.
5.1 Settings
- Date & Time: Set the date and time on the system.
Use the joystick left/right to select the item(MONTH,DAY
YEAR,HOUR,MINUTE,SECOND), and use the joystick
up/down to set the time.
Note：You can also synchronize the system time with an
Internet time server. Ensure there is a checkmark next to
Synchronize with an Internet time server then push the
joystick to confirm.
You must keep the system connected to your
wireless network using the included Ethernet cable
to synchronize with the Internet time server.