User's Manual

3.1 Motion Recording
System only records when motion is detected by a camera(s).Press Motion on the top of the receiver to
start motion recording. There is a
on the bottom right of corner. In this mode the receiver starts
recording prior to 5 seconds when motion detected by any activated camera. The recording time can be
set to 15s,30s or 1minitus after last detection. (Receiver support recording 4 camera at the same time in
quad mode)
Press Motion again or press Rec to stop recording, after stopping recording press Motion to cancel
automatic recording mode.
3.2 Manual Recording
,Press Rec on the top of the receiver to starts manual recording. Press the key again to stop manual
recording.
Note: In Quad view,it can continuous record from up to 4 cameras at a time.
3.3 Schedule Recording
Continuous or motion event recording from up to four cameras according to a weekly schedule. Set the
recording start time and end time, then switch on schedule recording in the menu to enable schedule
recording. In this mode the receiver records at a certain time every day.
3.4 Overwrite
Enter recording menu—overwrite—choose “yes” to activate overwrite function. Overwrite function can
automatically delete previous records when the SD card is full, and record new films.
4 Playback
Playback mode allows you to playback recorded video files from the SD card. You can view videos or
images directly on the system or by connecting the SD
card to your computer.
4.1 Video Playback
To playback recorded video on the system:
1. During live viewing, push joystick OK, The Recording
File List opens.
2. Press the joystick up / down arrow to change the
displayed month.
3.Press the joystick left/right arrow to select the
channels you would like to view recordings from:
•Press the joystick left / right arrow to select the channel numbers
•Press the joystick up / down arrow to show or hide each channel on the calendar.
• Select the button with all four channels to show recordings from all connected cameras on the
calendar.