User's Manual

4
1
Touch the Lorex Care icon to
launch the app.
FPO
iPhone®/iPad® Ethernet Setup
2
Enter the ID code for the cradle in
one of the following ways:
B. Tap Add and manually enter the UID printed on
the back of the cradle. You may need to do this if
your device does not have a camera (for example, 1st
generation iPads).
A. Tap QRCode and scan the QR code on the side
of the cradle using your device’s camera.
C. If your device is on the same network as the cradle,
it will detect the cradle UID. Tap the UID to enter.
3
B
A
C
Enter a name for
your monitor
Enter the default
password 000000
4
••••••
Tap Save
5
The monitor will show up in your device
list with an Online status.
Tap the monitor
to connect