User's Manual

ENGLISH
3
Getting Started
4
On your smartphone or tablet, download
Lorex Care for free from the App Store
SM
(iPhone®/iPad®) or the Google Play Store
(Android™).
1
Connect the cradle power adapter to the
cradle. Connect the other end to a power
outlet.
2
Place the monitor onto the power/network
connector on the cradle. Use the stand-up
guides to help place the monitor.
Power/network
connector
The monitor will charge when connected
to the cradle.
The next steps in the setup depend if you are
connecting to the cradle using an iPhone®/
iPad® or Android™ device.
3
Connect the cradle to your router using an
Ethernet cable (included).
NOTE: Ensure the switch on the back is set to
INTERNET mode. DIRECT mode is for service use
only.
INTERNET
For iPhone®/iPad®:
go to page 4
For Android™:
go to page 10